You are here

AN2094 - PSoC® 1 - Getting Started with GPIO | Cypress Semiconductor

AN2094 - PSoC® 1 - Getting Started with GPIO

最近更新: 
2018 年 2 月 27 日
版本: 
*K

AN2094 discusses relevant topics on general-purpose input and output (GPIO) such as drive modes, shadow registers, and GPIO interrupts to get started with PSoC® 1 GPIOs. This document also provides a few tips and briefs of the other resources associated with PSoC 1 GPIOs.

日本語 !!

The general-purpose input and output (GPIO) is a very critical part of any microcontroller unit (MCU) as it forms the bridge between the external world and the MCU. The type and nature of this external world bridge depends on the end application. For instance, an ADC requires a GPIO to be an analog pin, whereas an I2C or SPI digital communication block requires the same GPIO to be digital. To set up this external world bridge, you need to know the end application and the GPIO system of the MCU that is used. PSoC, like any other controller, has its own GPIO system. This application note discusses the application-specific parameters of the GPIO system. A detailed technical overview of the system is available in the General Purpose I/O chapter of the PSoC Core section in the respective device TRM. 

Gpio Cell Structure

 

范例项目

所支持的 H/W 和 S/W 所支持的 PSoC1 器件
PSoC  Designer 版本 H/W 套件 CY8C20xxx CY8C21xxx CY8C22xxx CY8C23xxx CY8C24xxx CY8C27xxx CY8C28xxx CY8C29xxx
5.4 CY3210-PSoCEVAL1 x34 x23, x34

x45

  x23A, x94 x43 x x66

 

 

用于 camtasia 屏幕录像

 

用于 camtasia 屏幕录像

翻译文档仅作参考之用。我们建议您在参与设计开发时参考文档的英语版本。