You are here

AN2223 - PSoC® 1 - Approximating an Opamp with a Switched Capacitor Integrator | 赛普拉斯半导体

AN2223 - PSoC® 1 - Approximating an Opamp with a Switched Capacitor Integrator

最近更新: 
2015 年 8 月 18 日
版本: 
*D

Opamps have simplified circuit design for engineers. They form a basic building block for the analog and mixed-signal design. PSoC 1 analog blocks, both continuous time (CT) and switched capacitor (SC) do not have a native opamp mode. They are wired so that they can create PGAs, INSAMPs, Filters, Integrators, and so on. However, in some designs only a plain opamp is required. This application note shows how to configure a switched capacitor block so that it approximates the functionality of an opamp.

The application note discusses the following topics:

  • A brief explanation of how an opamp works.
  • An explanation of how a switched capacitor integrator can emulate an opamp (faux opamp).
  • Examples of faux opamp circuits.
     

This application note does not give in depth information about switched capacitor blocks. For more information please refer AN2041  PSoC 1 – Understanding PSoC 1 Switched Capacitor Analog Blocks.

Block Diagram of AN2223

 

 

 

 

 

 

 

 

范例项目

所支持的 H/W 和 S/W 所支持的 PSoC1 器件
PSoC  Designer 版本 H/W 套件 CY8C20xxx CY8C21xxx CY8C22xxx CY8C23xxx CY8C24xxx CY8C27xxx CY8C28xxx CY8C29xxx
5.1 CY3210-PSoCEVAL1         x23A, x94 x43 x x66