AN84858 - PSoC® 4 Programming Using an External Microcontroller (HSSP) | 赛普拉斯半导体
AN84858 - PSoC® 4 Programming Using an External Microcontroller (HSSP)
最近更新:
2020 年 5 月 28 日
版本:
*M
AN84858 shows you how to implement PSoC® 4 device programming with an external microcontroller by using modular C code. In this process, called Host Sourced Serial Programming (HSSP), the host microcontroller programs PSoC 4 through the serial wire debug (SWD) interface. The C code is written so that it can be ported to any microcontroller with minimal changes, speeding up HSSP application development for PSoC 4.
简介
PSoC 4 device programming refers specifically to the programming of the nonvolatile memory in PSoC 4 by using an external host programmer. The host can be the programmer supplied by Cypress (CY8CKIT-002 MiniProg3), a third-party programmer, or a custom programmer (e.g., an on-board microcontroller). This application note explains how to implement a host programmer to program a PSoC 4 device.
Project |
Device
|
Development Kit
CY8CKIT-xxx |
Compiler
|
|||||||
架构
|
Silicon
Revision |
V3.2 or higher |
V3.0 or
Lower |
Keil
|
GCC
|
MDK
|
RVDS
|
|||
AN84858.zip
|
PSoC 5LP
|
Prod
|
是
|
否
|
是
|
是
|
否
|
是
|
是
|
是
|
Refer to KBA93541 for a method to program a PSoC 4 using CY8CKIT-049.
翻译文档仅作参考之用。我们建议您在参与设计开发时参考文档的英语版本。