You are here

AN86526 - PSoC® 4 I2C Bootloader | 赛普拉斯半导体

AN86526 - PSoC® 4 I2C Bootloader

最近更新: 
2019 年 3 月 20 日
版本: 
*G
AN86526 describes an I2C-based bootloader for PSoC® 4. In this application note, you will learn how to use PSoC Creator to quickly and easily build an I2C-based bootloader project and bootloadable project. You will also see how to build an I2C-based embedded bootloader host program.

简介

Bootloaders are a common part of MCU system design. A bootloader makes it possible for a product’s firmware to be updated in the field. At the factory, initial programming of firmware into a product is typically done through the MCU's Joint Test Action Group (JTAG) or ARM® serial wire debug (SWD) interface. However, these interfaces are usually not accessible in the field.

This is where bootloading comes in. Bootloading is a process that allows you to upgrade your system firmware over a standard communication interface such as USB, I2C, UART, or SPI. A bootloader communicates with a host to get new application code or data and writes it into the device's flash memory.

The following table indicates the PSoC devices, PSoC Creator versions, compilers, and development kits that will work with this application note project:



Project
Device
PSoC Creator Version
Development Kit CY8CKIT-xxx
Compiler
架构
Silicon Revision
V3.0 SP2 or higher
V3.0 or lower
042/ 040 DVK
001 DVK
Keil
GCC
MDK
RVDS

AN86526.zip

Prod
翻译文档仅作参考之用。我们建议您在参与设计开发时参考文档的英语版本。