You are here

1.2 Volt Comparator (CSD Comp) | Cypress Semiconductor

1.2 Volt Comparator (CSD Comp)

最近更新: 
2018 年 3 月 20 日
版本: 
1.0
特性 符号图
 
  • Two speed modes
  • Any pin in Port 0, Port 1 and Port 2 can be connected to the non-inverting input
  • The inverting input is connected to a 1.2 V reference
CSD Diagram

概述

The 1.2 Volt Comparator (CSD_Comp) component provides a hardware solution to compare one input voltage with the internal 1.2 V reference (Vref) of the PSoC 4000 family of devices. The CSD_Comp component makes use of the comparator that is present in the Capacitive Sensing Delta-Sigma Modulator (CapSense® CSD) block. This comparator functionality is only present on the PSoC 4000 family of devices and only available when not using the CapSense CSD block for Capacitive Sensing. You can sample the output in software or route it to a GPIO. There are two speed levels to allow you to optimize for response time or power consumption.

翻译文档仅作参考之用。我们建议您在参与设计开发时参考文档的英语版本。