You are here

Filter | Cypress Semiconductor

滤波器

最近更新: 
2018 年 11 月 20 日
版本: 
2.30
特性

 
  • Easy filter configuration using the Digital Filter Block (DFB) available in select PSoC 3 and PSoC 5 LP devices
  • 支持两个单独的滤波器通道,其中每个通道均构造成为单独设计的四个分级级联。
  • Multiple FIR and IIR (Biquad) filter methods
  • Support for flexible coefficient entry
  • Final coefficient values available for further analysis
符号图

Filter 1 Image

概述

The Filter component allows easy creation of single or dual channel digital filters using the DFB. The component includes a filter design feature, which greatly simplifies the design and implementation processes. It supports two streaming channels that can be streamed directly from other hardware blocks (such as the ADC) using DMA. The filtered results can likewise be transferred using DMA, interrupts, or polling methods. The DFB’s 128 data and coefficient locations are shared as needed between the two filter channels, and this information is used to guide the choice of filter implementation. It reports (but does not set) the minimum bus clock frequency required to execute the filtering within the declared sample interval. This clock can then be set in the design-wide resource manager.

The Filter component supports many use cases. If something unusual occurs when using it, please report it (with a good description). Either email psoc_creator_feedback@cypress.com or contact tech support at https://www.cypress.com.



PSoC® Creator 滤波器 2.0 组件视频

 

 
翻译文档仅作参考之用。我们建议您在参与设计开发时参考文档的英语版本。