CYBLE-014008-00: EZ-BLE™ Creator Module | 赛普拉斯半导体
CYBLE-014008-00: EZ-BLE™ Creator Module
The Cypress CYBLE-014008-00 is a fully certified and qualified module supporting Bluetooth® Low Energy wireless communication. The CYBLE-014008-00 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC® 4 Bluetooth LE. Refer to the PSoC® 4 BLE datasheet for additional details on the capabilities of the PSoC 4 Bluetooth LE device used on this module.
The EZ-BLE™ Creator module is a scalable and reconfigurable platform architecture. It combines programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-014008-00 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals.
The CYBLE-014008-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 25 GPIOs in a small 11 × 11 × 1.80 mm package.
The CYBLE-014008-00 is a complete solution and an ideal fit for applications seeking a highly integrated Bluetooth LE wireless solution.
- Module size: 11.0 mm × 11.0 mm × 1.80 mm (with shield)
- 128-KB flash memory, 16-KB SRAM memory
- Up to 25 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
- Bluetooth SIG 5.1 qualified
- Certified to FCC, CE, MIC, KC, and ISED regulations
- 工业级温度范围：–40 °C 至 +85 °C
- 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
- Watchdog timer with dedicated internal low-speed oscillator (ILO)
- Two-pin SWD for programming
- Programmable analog
- 4 x Opamps
- 1 x 12-bit, 1-Msps SAR ADC
- 1 x Low-Power Comparators
- 1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
- Programmable digital
- 4 x universal digital blocks
- 4 x 16-bit configurable Timer/Counter/PWM blocks
- 2 x configurable serial communication blocks
- Certified to FCC, CE MIC, KC, and ISED regulations. Refer to KBA210574 for RF certification test reports.
- CYBLE-014008-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module
- TX output power: –18 dbm to +3 dbm
- Received signal strength indicator (RSSI) with 1-dB resolution
- TX current consumption of 15.6 mA (radio only, 0 dbm)
- RX current consumption of 16.4 mA (radio only)
- Low power mode support
- Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
- 休眠：150 nA with SRAM retention
- Stop: 60 nA with GPIO (P2.2) or XRES wakeup