You are here

CYBLE-022001-00: EZ-BLE™ Creator Module | 赛普拉斯半导体

CYBLE-022001-00: EZ-BLE™ Creator Module

最近更新: 
2021 年 1 月 05 日
版本: 
*N

概述

The Cypress CYBLE-022001-00 is a fully certified and qualified module supporting Bluetooth® Low Energy wireless communication. The CYBLE-022001-00 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 BLE.

The CYBLE-022001-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-022001-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package.

The CYBLE-022001-00 is a complete solution and an ideal fit for applications requiring Bluetooth LE wireless connectivity.

Module Description

  • Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield)
  • Bluetooth 5.1 single-mode module
  • 工业级温度范围:–40 °C 至 +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 128-KB flash memory
  • 16-KB SRAM memory
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Up to 16 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
  • Certified to FCC, CE, MIC, KC, and ISED regulations. Refer to KBA97094 for RF certification test reports.
  • Bluetooth SIG 5.1 qualified
  • CYBLE-022001-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module

Power Consumption

  • TX output power: –18 dbm to +3 dbm
  • Received signal strength indicator (RSSI) with 1-dB resolution
  • TX current consumption of 15.6 mA (radio only, 0 dbm)
  • Low power mode support
    • Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
    • 休眠:150 nA with SRAM retention 
    • Stop: 60 nA with XRES wakeup

Functional Capabilities

  • Up to 15 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ration (SNR) and liquid tolerance
  • 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer
  • Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART
  • Four dedicated 16-bit timer, counter, or PWM blocks (TCPWMs)
  • Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
  •  I2S master interface
  • Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles
  • Switches between Central and Peripheral roles on-the-go
  • Standard Bluetooth Low Energy profiles and services for interoperability
  • Custom profile and service for specific use cases