CYBLE-212020-01: EZ-BLE™ Creator Module | 赛普拉斯半导体
CYBLE-212020-01: EZ-BLE™ Creator Module
概述
The CYBLE-212020-01 is a turnkey Bluetooth® Low Energy wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC 4 BLE BT 4.2 chip.
The CYBLE-212020-01 includes FCC/ISED/KC/MIC/CE RF certification and Bluetooth SIG qualification. The CYBLE-212020-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-212020-01 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 4.2 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-212020-01 is drop-in compatible with the CYBLE-X120XX-0X modules.
The CYBLE-212020-01 is targeted at applications requiring large memory size and Bluetooth 4.2 compliance all in a cost-optimized solution.
Module Description
- Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield)
- Castelated solder pad connections for ease-of-use
- 256-KB flash memory, 32-KB SRAM memory
- Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog,HI-Z digital, or strong output
- Bluetooth 4.2 single-mode module
- Certified to FCC, ISED, MIC, KC, and CE regulations
- 工业级温度范围:–40 °C 至 +85 °C
- 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
- Watchdog timer with dedicated internal low-speed oscillator (ILO)
- Two-pin SWD for programming
- CYBLE-212020-EVAL EZ-BLE™ Creator BT 4.2 Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module
Power Consumption
- TX output power: –18 dbm to +3 dbm
- Received signal strength indicator (RSSI) with 1-dB resolution
- TX current consumption of 15.6 mA (radio only, 0 dbm)
- RX current consumption of 16.4 mA (radio only)
- Low power mode support
- Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
- 休眠:150 nA with SRAM retention
- Stop: 60 nA with GPIO (P2.2) or XRES wakeup
Functional Capabilities
- Up to 22 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ration (SNR) and liquid tolerance
- 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer
- Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART
- Four dedicated 16-bit timer, counter, or PWM (TCPWM) blocks
- LCD drive supported on all GPIOs (common or segment)
- Programmable low-voltage detect (LVD) from 1.8 V to 4.5 V
- I 2S master interface
- Bluetooth LE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles
- Switches between Central and Peripheral roles on-the-go
- Standard Bluetooth LE profiles and services for interoperability
- Custom profile and service for specific use cases