You are here

CYBLE-214015-01: EZ-BLE™ Creator Module | 赛普拉斯半导体

CYBLE-214015-01: EZ-BLE™ Creator Module

2020 年 12 月 28 日


The Cypress CYBLE-214015-01 is a fully certified and qualified module supporting Bluetooth Low Energy (BLE) 4.2 wireless communication. The CYBLE-214015-01 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC® 4 BLE.

The EZ-BLE PSoC® module is a scalable and reconfigurable platform architecture. It combines programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-214015-01 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals.

The CYBLE-214015-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 25 GPIOs in a small 11 × 11 × 1.80 mm package. The CYBLE-214015-01 is drop-in compatible with the CYBLE-014008-00 and CYBLE-214009-00 EZ-BLE Modules.

The CYBLE-214015-01 is a complete solution and an ideal fit for applications seeking a highly integrated BLE wireless solution.

Module Description

  • Module size: 11.0 mm × 11.0 mm × 1.80 mm (with shield)
  • 工业级温度范围:–40 °C 至 +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 256-KB flash memory
  • 32-KB SRAM memory
  • Programmable analog
    • 4 x Opamps
    • 1 x 12-bit, 1-Msps SAR ADC
    • 1 x Low-Power Comparators
  • 1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
  • Programmable digital
    • 4 x universal digital blocks
    • 4 x 16-bit configurable Timer/Counter/PWM blocks
    • 2 x configurable serial communication blocks
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for Programming
  • Up to 25 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
  • Certified to FCC, CE, MIC, KC, and IC regulations. Refer to KBA97094 for RF certification test reports.
  • Bluetooth SIG 4.2 qualified
  •  CYBLE-214015-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module