CYBLE-224110-00: EZ-BLE™ Creator XT/XR Module | 赛普拉斯半导体
CYBLE-224110-00: EZ-BLE™ Creator XT/XR Module
概述
The Cypress CYBLE-224110-00 is a fully certified and qualified module supporting Bluetooth® Low Energy wireless communication. The CYBLE-224110-00 is a turnkey solution that includes onboard power amplifier (PA), low-noise amplifier (LNA), crystal oscillators, chip antenna, passive components, and the Cypress PSoC® 4 Bluetooth LE. Refer to the PSoC 4 Bluetooth LE datasheet for additional details on the capabilities of the PSoC 4 Bluetooth LE device used on this module.
The EZ-BLE™ Creator XT/XR module provides extended industrial temperature operation (XT) as well as extended communication range (XR). The EZ-BLE XT/XR module is a scalable and reconfigurable platform architecture, combining programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-224110-00 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals. The CYBLE-224110-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 4.1.
Module Description
- Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
- Extended range:
- Up to 400 meters bidirectional communication[1,2]
- Up to 450 meters in beacon-only mode[1]
- Extended industrial temperature range: –40 °C 至 +105 °C
- Up to 25 GPIOs
- 256-KB flash memory, 32-KB SRAM memory
- Bluetooth 4.1 qualified single-mode module
- Certified to FCC, CE, MIC, KC, and ISED regulations. Refer to KBA97094 for RF certification test reports.
- 32-bit processor (0.9 DMIPS/MHz), operating at up to 48 MHz
- Programmable analog:
- Four opamps with reconfigurable high-drive external and high-bandwidth internal drive, comparator modes, and ADC input buffering capability; can operate in Deep-Sleep mode
- 12-bit, 1-Msps SAR ADC with differential and single-ended modes; channel sequencer with signal averaging
- Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
- One low-power comparator that operates in Deep-Sleep mode
- Programmable digital:
- Four programmable logic blocks called universal digital blocks, (UDBs), each with eight macrocells and datapath
- Cypress-provided peripheral Component library, user-defined state machines, and Verilog input
- Watchdog timer with dedicated internal low-speed oscillator
- Two-pin SWD for programming
- CYBLE-224110-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE™ Creator Module
Power Consumption
- TX output power: –18 dbm to +9.5 dbm
- RX Receive Sensitivity: –95 dbm
- Received signal strength indicator (RSSI) with 1-dB resolution
- One-second connection interval with PA/LNA active: 26.3 µA
- TX current consumption:
- Bluetooth LE silicon: 15.6 mA (radio only, 0 dbm)
- SE2438T: 20 mA (PA/LNA only, +9.5 dBm)
- RX current consumption
- Bluetooth LE silicon: 16.4 mA (radio only)
- SE2438T: 5.5 mA (PA/LNA only)
- Low power mode support (Bluetooth LE silicon only)
- Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
- 休眠:150 nA with SRAM retention
- Stop: 60 nA with XRES wakeup