CY3240-I2USB | 赛普拉斯半导体
The CY3240-I2USB Kit is obsolete as of December 23,2014. CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit is the replacement for CY3240-I2USB Kit functionality. Please refer: https://www.cypress.com/go/CY8CKIT-002
Please contact Cypress customer support if you have any questions.
The I2C-USB Kit allows one to test, tune and debug hardware and software of a PSoC application by bridging the USB port to I2C. Populated with the CY8C24894 PSoC device. A wide variety of devices can be connected to the PC using this bridge. Among them are: EEPROMs, realtime cLocks, ADC/DAC converters, LCD displays, regulated DC/DC converters, port expanders and many other devices incorporating the I2C interface. The number of devices that can be connected is constrained only by the I2C address limit and physical ability of the I2C bus.
Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.
CY3240-I2USB Rev. A Contents:
- I2C-USB Bridge
- I2C Slave Demonstration Board
- USB Mini B Cable (6 feet)
- Supporting Software CD
|PSoC Programmer||This kit requires PSoC Programmer for programming|