SK-FM3-100PMC | 赛普拉斯半导体
This development kit is no longer available. This web page has been left in place for informational purposes only.
This kit has been replaced by SK-FM3-100PMC-MB9BF516N .
The SK-FM3-100PMC supports MB9B500 Series
The SK-FM3-100PMC is a multifunctional evaluation board for the Spansion microcontroller of the MB9B100, MB9B300, MB9B400 and MB9B500 Series.
The board allows the designer immediately to start software development before his own final target system is available.
Contents of the kit:
- Starterkit SK-FM3-100PMC incl. MB9BF506NPMC
- Software Examples
- The SK-FM3-100PMC is a multifunctional evaluation board for the Spansion microcontroller of the MB9B100, MB9B300, MB9B400 and MB9B500 Series.
- 8-12V unregulated external DC power supply
- On-board 5.0V and 3.3V voltage regulator
- Two 7-Segment LED-Displays
- Reset button, Reset LED
- Two user buttons
- In-Circuit Flash programming (UART, USB, JTAG)
- All MCU pins routed to edge connectors
- All resources available for evaluation
- 4 MHz main crystal
- RS232 interface (SUB-D9 connector)
- USB to serial converter (Type-B connector)
- CAN interface (SUB-D9 connector)
- USB Host (Type-A) and Device (Type-B) connectors
- JTAG and ETM interface
- 符合有害物质限制 (RoHS) 标准
- CE conform
SK-FM3-100PMC - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
Use only the template-project as starting point for your application. Only the template-project will be updated in case of any change of the header files, startup code etc.!
|Tool specific Software Examples|
|USB Host Mass Storage bootloader for FM3 flashing motorrola S-Record file 9bf506n.mhx or app.mhx located on an USB stick into user code area starting linked to 0x00004000. This bootloader is for use with SK-FM3-100PMC, MB9BF506N MCU.||sk-fm3-100pmc_usb_host_massstorage_bootloader-v11.zip|
|USB-driver V1.0 for Win2000, WinXp, Vista and Windows 7||sk-fm3-100pmc_usb_win2000_xp_vista_windows7_v10.zip|