You are here

Cypress Sensing Technologies | 赛普拉斯半导体

Cypress Sensing Technologies

Cypress' cutting-edge sensing technologies have enabled Cypress to be the market leader in capacitive- and inductive-sensing applications. With industry-leading CapSense® capacitive-sensing and MagSense™ inductive-sensing, Cypress provides sensing solutions that "Just Work" and deliver the robustness and intelligence that consumer, industrial, automotive, and Internet of Things (IoT) applications demand.


CapSense capacitive-sensing can be used for applications that require touch buttons, sliders, wheels, trackpads, and touchscreens. It provides advanced features such as proximity sensing, hover and glove touch, liquid tolerance, and liquid-level sensing. In addition, CapSense provides an intelligent SmartSense® algorithm that compensates for environmental and manufacturing variations.

MagSense inductive-sensing can be used in applications that require metal detection. Applications that require detection through high-quality metal overlays, water-proofing, rotary and linear encoder functionality, and proximity sensing can be designed using MagSense.

Capacitive-sensing vs. Inductive-sensing

  Capacitive-sensing Inductive-sensing
  • Provides hybrid sensing (mutual and self capacitive-sensing methods) to enable advanced features such as proximity sensing, hover and glove touch, liquid tolerance
  • Delivers multi-touch sensing capabilities
  • Enables a low-cost system
  • Enables ease-of design into an application
  • Provides robustness and reliability in harsh environment and surroundings
  • Enables a fully water-proof system
  • Enables underwater capabilities
  • Provides proximity sensing, glove touch
  • Not fully water-proof, only liquid tolerant (rejects water)
  • Easily affected by environment and surroundings
  • Tuning can be difficult
  • Complex HW design
  • Complex HW design results in lower yield
  • Tuning can be difficult

Learn about Infineon Sensors

CapSense Capacitive-Sensing

CapSense® capacitive touch sensing technology measures changes in the capacitance between a plate (the sensor) and its environment to detect the presence of a finger on or near a touch surface.

Capacitive Touch Sensor

A typical capacitive sensor consists of a copper pad of proper dimensions etched on the surface of a PCB, where a nonconductive overlay serves as the touch surface for the button.


Self-capacitive sensing

In a self-capacitance sensing system, the GPIO pin is connected to a sensor pad by traces and vias. Typically, a GND hatch surrounds the sensor pad to isolate it from other sensors and traces.

When a finger is present on the overlay, the conductive nature and large mass of the human body forms a grounded, conductive plane parallel to the sensor pad, where a parallel plate capacitor is formed. The capacitance between the sensor pad and the finger is: .
CF is the finger capacitance. The parasitic capacitance (CP) and finger capacitance (CF) are parallel to each other because both represent the capacitance between the sensor pin and GND. Therefore, the total capacitance CS is the sum of CP and CF. PSoC® converts the capacitance CS into equivalent digital counts called raw counts. Because a finger touch increases the total capacitance of the sensor pin, an increase in the raw counts indicates a finger touch.

Parasitic Capacitance

Finger Capacitance


Top and Side View

Cm with Finger Touch

Mutual-capacitive sensing

Mutual-capacitance measures the capacitance between two electrodes, the transmit (Tx) and receive (Rx) electrodes. In a mutual-capacitive sensing system, a digital voltage signal switching between a VDDIO or VDDD (if VDDIO is not supported in the device) and GND is applied to the Tx pin and the amount of charge received on the Rx pin is measured. The amount of charge received on the Rx electrodes is directly proportional to the mutual capacitance (CM) between the two electrodes.

When a finger is placed between the Tx and Rx electrodes, the CM decreases. Because of the reduction in CM. the charge received on the Rx electrodes also decreases. The capacitive-sensing system measures the amount of charge received on the Rx electrode to detect a touch/no touch condition.

产品 CapSense Capacitive-Sensing Product Selector Guide (PSG)
PSoC 6 Microcontroller PSoC 6 MCU PSG
PSoC 4 Microcontroller PSoC 4 MCU PSG
PSoC 5 Microcontroller PSoC 5 MCU PSG
PSoC 3 Microcontroller PSoC 3 MCU PSG
PSoC 1 Microcontroller PSoC 1 MCU PSG
CapSense MBR3 CapSense MBR3 PSG

MagSense Inductive-Sensing

MagSense™ inductive-sensing is a low-cost, robust solution that seamlessly integrates with existing user interfaces, and is also used to detect the presence of metallic or conductive objects.

Inductive-sensing works on the principle of electromagnetic coupling between a sensor coil and the metal target to be detected. When the metal target enters the electromagnetic field induced by a sensor coil, some of the electromagnetic energy is transferred into the metal target, as shown in the figure below.

Field Coupling Between Sensor and Metal Target

This transferred energy causes a circulating electrical current called an eddy current. The eddy current flowing in the metal target induces reverse electromagnetic field on the sensor coil, which results in a reduction of the effective inductance of the sensor coil.

The sensor coil is placed in parallel with a capacitor. The parallel combination of sensor inductance and the external capacitor is called a tank circuit. The reduction in the sensor coil inductance causes an upward shift in the resonant frequency of the tank circuit, where this shift in frequency changes the amplitude of the signal across the sensor coil. The change in the amplitude of the sensor coil signal is measured by the PSoC® MCU to detect the presence of the metal target in the proximity-sensing distance.

产品 MagSense Inductive-Sensing Product Selector Guide (PSG)
PSoC 4700 Microcontroller PSoC 4700 MCU PSG

PSoC MCUs: CapSense Capacitive-Sensing Documentation

Document Type 主题
数据表 PSoC 6 MCU Datasheets
PSoC 4 MCU Datasheets
PSoC 5LP MCU Datasheets
PSoC 3 MCU Datasheets
PSoC 1 MCU Datasheets
应用手册 AN85951 - PSoC 4 and PSoC 6 MCU CapSense® Design Guide
AN64846 - Getting Started with CapSense
AN210998 - PSoC 4 Low-Power CapSense Design
AN90114 - PSoC 4000 Family Low-Power System Design Techniques
AN202478 - PSoC 4 - Capacitive Liquid-Level Sensing
AN92239 - Proximity Sensing with CapSense
AN79953 - Getting Started with PSoC 4
AN88619 - PSoC 4 Hardware Design Considerations
AN86233 - PSoC 4 Low-Power Modes and Power Reduction Techniques
AN79973 - PSoC3 and PSoC5 CapSense CSD - IEC 60730 Class B Safety Software Library
AN72362 - Reducing Radiated Emissions in Automotive CapSense Applications
CapSense Firmware Guides PSoC 4/6 CapSense Middleware API reference
PSoC 4/6 CapSense Middleware
PSoC 4/6 CapSense Configurator user guide
PSoC 4/6 CapSense Tuner user guide
PSoC 6 CapSense Component datasheet
PSoC 4 CapSense Component datasheet
PSoC 4 MagSense Component datasheet
PSoC 4 Senzei Component datasheet
技术参考手册 PSoC 6 MCU Technical Reference Manual
PSoC 4 MCU Technical Reference Manual
PSoC 5LP MCU Technical Reference Manual
PSoC 3 MCU Technical Reference Manual
PSoC 1 MCU Technical Reference Manual
Programming Specifications PSoC 6 MCU Programming Specification
PSoC 4 MCU Programming Specification
PSoC 5LP MCU Programming Specification
PSoC 3 MCU Programming Specification
PSoC 1 MCU Programming Specification

CapSense MBR3 Controllers: Capacitive-Sensing Documentation

Document Type 主题
数据表 CapSense MBR3 Device Datasheet
应用手册 CY8CMBR3xxx CapSense Design Guide
技术参考手册 CapSense MBR3 Register Technical Reference Manual
Programming Specifications CapSense MBR3 Third Party Programming Specification

PSoC MCUs: MagSense Inductive-Sensing Documentation

Document Type 主题
数据表 PSoC 4700 MCU Datasheet
应用手册 AN219207 - Inductive Sensing Design Guide
AN79953 - Getting Started with PSoC 4
AN88619 - PSoC 4 Hardware Design Considerations
AN86233 - PSoC 4 Low-Power Modes and Power Reduction Techniques
技术参考手册 PSoC 4700 Technical Reference Manual
Programming Specifications PSoC 4 MCU Programming Specification

Design and Development Tools for CapSense and MagSense

PSoC Creator is an Integrated Design Environment (IDE) that enables concurrent hardware and firmware editing, compiling and debugging of PSoC 3, PSoC 4,and PSoC 5 MCUs. Applications are created using schematic capture and over 150 pre-certified, production-ready peripheral Components.


ModusToolbox® was built to make the developers life easy. It is a collection of easy-to-use software and tools enabling rapid development of Infineon MCUs, covering applications from embedded sense and control to wireless and cloud-connected systems using AIROC™ Wi-Fi, AIROC™ Bluetooth® and AIROC™ Wi-Fi and Combo devices.


EZ-Click 2.0 is a simple yet powerful software tool that enables development of CapSense® MBR3 solutions. This lightweight Windows® GUI-based tool has been improved to make development of capacitive user-interfaces extremely simple and quick. The tool allows you to setup sensor configuration, apply global system properties, monitor real-time sensor output, and run production-line system diagnostics – all in an intuitive, visually-driven tool, with absolutely no firmware development required!


PSoC 4 Development Kits for CapSense and MagSense

CapSense Capacitive-Sensing Kits

CY8CKIT-145-40XX Kit Image

CY8CKIT-149 Kit Image


Prototyping Kit


Prototyping Kits

CY8CKIT-041-41XX Kit Image

CY3280-MBR3 Kit Image


Pioneer Kits


CapSense MBR3 Kit

Magsense Inductive-Sensing Kits

CY8CKIT-148 Kit Image



Pioneer Kit


All PSoC 4 MCU Kits

All PSoC 6 MCU Kits

CapSense Capacitive-Sensing for an Induction Cooktop

PSoC MCUs add CapSense’s robustness and intelligence to an induction cooktop’s user interface. In addition, it integrates multiple external analog and digital peripherals within the induction cooktop, with the flexible digital and analog resources provided with the PSoC MCU architecture.

PSoC MCUs provide:

  • CapSense capacitive-sensing for buttons, sliders, and proximity sensing for the User Interface (UI)
  • Analog peripherals to design custom Analog-Front-Ends (AFEs) to interface to various sensors
  • Digital peripherals to drive the cooktop coils, buzzer, and cooling fans
  • Segment LCD drivers to run a segment LCD

MagSense Inductive-Sensing for a Washing Machine

PSoC 4700 MCUs enable door position detection of the washing machine lid and rotary encoder functionality with MagSense. In addition, it can integrate simple system peripherals using the flexible analog and digital resources provided in the flexible PSoC 4700 MCU architecture.

PSoC 4700 MCUs provide:

  • CapSense capacitive-sensing for buttons, sliders, and proximity sensing for the UI
  • MagSense inductive-sensing for door position detection of the washing machine lid and rotary encoder functionality for the dials on the washing machine
  • Digital peripherals to drive LEDs and buzzers
  • Analog peripherals to design customer AFEs to interface with various sensors